LP1512

LPT1613 TC EX BSII
ENGINE Cummins 6BT – 5.9 WHEELS & TYRES 9.00×20 – 14 PR Diagonal ply
Type Water-cooled, direct injection, Turbo charged Diesel engine Wheel Rims 7.00 x 20
No of cylinders 6 inline No of Wheels Front-2, Rear-4, Spare-1
Capacity 5883 cc
Core/Stroke 102 mm x 120 mm FUEL TANK 250 litres
Max. Engine Output 93.5 kw (125.3 HP) at 2500 rpm
Max. Torque 410 Nm (41.8mkg) at 1400-1700 rpm COWL All steel full forward control cowl
Compression ratio 17.6 : 1
Firing order 1-5-3-6-2-4 ELECTRICAL SYSTEM
Oil filter Spin-on full flow paper type System voltage 24 volts
fuel filter Two stage Pre and fine filtration with water separator Alternator capacity 45 Amps
Fuel injection pump MICO ‘A’ type inline Battery 2 x 12 V, 180 Ah capacity
Air Filter Dry type, remote mounted
Governor Built – in centrigugal PERFORMANCE
Capacity of cooling system ~ 24 litres (total) Max geared speed in top gear (with Std. rear axle) 87 kmph. Std
Crank case oil capacity Max. 14.3 litres, Min. 12.3 Litres 79 kmph For optional Ratio of R/A
Weight of engine 413 kg (dry) with flywheel and alternator but without starter and air compressor Max. climbing ability in 1st gear with std gear box & rear axle 16.2% std, 18% For optional Ratio of R/A
Radiator frontal area 2887 sq.cm
WHEELBASE (mm) 4725          5545
CLUTCH Single plate dry friction type Minimum Turning Circle Dia. In (mm) as per IS : 9435 18915        20400
Outside diameter of clutch lining 310 mm Minimum turning Clearance Circle dia.in (mm) as per IS : 9435 20970      22530
Friction area 1030 sq.cm (approximately)
MAIN CHASSIS DIMENSIONS AS PER IS 9435 (IN mm)
GEAR BOX GBS 50 Wheelbase       4725                      5545
No of gears 5 forward, 1 reverse Track Front       1950                     1950
Gear ratios 1st – 7.51, 2nd – 3.99, 3rd – 2.50, 4th – 1.51, 5th – 1.00, 6th – 6.93 Track Rear       1809                     1809
FRONT AXLE Heavy duty, Forged beam, reverse elliot type Overall length       8955                    10645
Max. Width       2434                     2434
REAR AXLE Single reduction, hyphoid gears, fully floating axle shafts Front Overhang       1775                    1775
Ratio 5.285 : 1 (37/7) standard
5.857 : 1 (41/7) optional WIEGHTS (kg) Wheel Base Options
4725            5545
STEERING Integral hydraulic power assisted steering Bare chassis kerb weight with cowl (With spare wheel and tools as per IS 9211) 4190           4380
FRAME Ladder type heavy duty frame with rivetted/bolted cross members.  Side members are of channel section Max. permissible FAW 4700           4700
Max. permissible RAW 10160         10160
SUSPENSION Semi-elliptical leaf spring at front & rear Max. permissible GVW 14860         14860
Shock absorbers Hydraulic double acting telescopic type at front only.

TATA Inspired by People